×Cette page a été traduite automatiquement de l’anglais et peut contenir des erreurs. Original en anglais

Ligne de commande

Le programme axqua. axqua.cli contient les commandes qui préparent et inspectent un cas, et axqua.jobcli les commandes du système tâche. Syntaxe Terminal liste les commandes du point de vue d’un utilisateur.

Commandes cas

Command-line entry point: axqua.

Two forms:

• axqua <config.yml> [--check|--dry-run] - build a full TELEMAC case (default; the configuration path is positional).

• axqua clip <raster> -b <boundary> -o <out> - clip a single raster to a region-of-interest polygon, without needing a full configuration.

• axqua rating -o <out.csv> --manning <n>|--strickler <Kst> --slope <S0> --width <b> [--side-slope <m>] [--bed-elevation <z>] --q <Q...> - synthesize a normal-flow outflow stage-discharge curve to use as boundaries.stage_discharge.

• axqua targets <config.yml> [-o <out.xlsx>] [--force] - generate the user-fillable calibration-target-data.xlsx template (hydraulics / morphodynamics ground truth + calibration-parameter ranges) for a case.

• axqua openfoam <config.yml> [--check] [--cell-size <m>] [--layers <n>] - build the OpenFOAM (interFoam) free-surface case: a terrain-following all-hexahedral mesh, fields seeded from the converged TELEMAC 2D result, and both staged dictionary sets. --check only reports the cell count.

• axqua case-status <config.yml> [--check-env] [--full] [--json] - report what the case can do (implemented / configured / built / run, per solver) and refresh its MODEL=<SOLVER>_<ENABLED|DISABLED> marker files. --json is what a QGIS plugin reads to decide which tabs to show.

Job verbs (see axqua.jobcli), which run work that outlives this shell:

• axqua submit <config.yml> --kind <kind> - create a persistent job and start it detached; prints the job id.

• axqua execute <job> - run a job synchronously here (the debugging path).

• axqua status <JOB_ID> / cancel / logs / list / profiles.

status is overloaded, and the argument decides: an existing path means the case (the historic meaning, kept working), while an argument matching the job-id grammar means the job. The two cannot collide - a job id is never a path.

axqua.cli.main(argv=None)

Paramètres:

argv (list[str] | None)

Type renvoyé:

int

Commandes tâche

The job verbs: submit, execute, status, cancel, logs, list.

Kept out of cli.py so the build commands and the job commands stay legible apart, and because a QGIS plugin’s entire view of axqua is this file’s output. Two properties matter more than the exact spelling of any flag:

Machine-readable output. Every verb takes --json and emits one envelope shape: {"ok", "command", "axqua", "data", "error"}. The document goes to stdout and all narration to stderr, so a caller can parse stdout unconditionally. Plan §11 is explicit that QGIS must never parse human-readable console logs to obtain state, and this is what makes that possible.

Exit codes that mean something. A uniform 1 forces a GUI to parse text to find out what went wrong. The AxquaError categories already carry stable codes, so they map onto distinct exit codes here.

The status collision, resolved by a rule

axqua status <config> has always meant case status. The job verb wants the same word. Rather than break the existing spelling or guess, the argument decides:

• an existing path -> case status (with a deprecation notice pointing at case-status);

• something matching JOB_ID_RE -> job status.

A job id is never a path and a path never matches the job-id grammar, so the two cannot be confused - and the rule is tested in both directions.

axqua.jobcli.EXIT_OK = 0

Exit codes by error category, so a caller can branch without parsing a message.

axqua.jobcli.emit(command, data, *, as_json, lines=None)

Print a success result in whichever form was asked for.

Paramètres:

• command (str)

• data (Any)

• as_json (bool)

• lines (list[str] | None)

Type renvoyé:

int

axqua.jobcli.fail(command, exc, *, as_json, verbose=False)

Report a failure and choose the exit code from its category.

Paramètres:

• command (str)

• exc (BaseException)

• as_json (bool)

• verbose (bool)

Type renvoyé:

int

axqua.jobcli.parse_args(parser, argv, command)

parser.parse_args, but a usage error still leaves an envelope behind.

argparse prints its usage to stderr and exits 2 with empty stdout. For a shell that is exactly right, but the plugin’s whole boundary is « run it and read the JSON on stdout », so a mistyped flag arrives there as « axqua returned something that is not JSON » - a message about the protocol, for what is really a typo. Writing the envelope first costs nothing, and argparse’s own message still goes to stderr where it always did. The exit code is unchanged, because shell callers branch on it.

Paramètres:

• parser (ArgumentParser)

• argv (list[str])

• command (str)

axqua.jobcli.run_submit(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

axqua.jobcli.run_execute(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

axqua.jobcli.run_job_status(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

axqua.jobcli.run_cancel(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

axqua.jobcli.run_logs(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

axqua.jobcli.run_list(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

axqua.jobcli.run_profiles(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

Commandes de profil

axqua profile: inspect, create and check the profile of this computer.

The profile (axqua.core.profile) is what the Configuration tab of the QGIS plugin edits. These commands are the same operations for a terminal, and they are how the plugin performs them: it never imports aXqua, so reading, writing and checking a profile all go through here and come back as one JSON document.

path where the active profile is, or would be show print it detect what a profile for this computer would contain; writes nothing init detect, written to the default location (refuses to overwrite) check everything that is wrong with it, as findings; never fails on a finding write replace it with a JSON document read from standard input locate locate <program> <folder>: what aXqua runs of a program in that folder

axqua.profilecli.run_profile(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

Commandes d’installation

axqua install: install TELEMAC, OpenFOAM and the postprocessors.

overview what this computer is, and what is installed, running or was tried plan what an installation would do and what is missing; changes nothing packages the system packages an installation needs; --elevate installs them start run an installation, detached unless --foreground status how far an installation is, with the end of its log (--tail) cancel stop an installation; what is already built stays list every installation on record telemac-examples download the files that TELEMAC’s own example cases read

The installation wizards of the QGIS plugin are these commands with a window around them. run is what a detached installation executes and is not meant to be typed.

axqua.installcli.run_install(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

Exporter les commandes

axqua export: TELEMAC results for ParaView and VisIt.

axqua export <case-file> convert every result of the case axqua export <case-file> --list what the case has, and what is exported already axqua export <result.slf> convert one file, without a case

QGIS reads the result format of TELEMAC directly; ParaView and VisIt do not. The conversion (axqua.postproc.selafin_vtk) writes one folder per result with a .pvd file for ParaView and a .visit file for VisIt, into the folder vtk of the postprocessing folder of the case. An OpenFOAM result needs no conversion: both programs open the case folder.

axqua.exportcli.run_export(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

Commandes de fichier de cas

axqua schema, axqua case and axqua check: what an editor of a case needs.

The case editor of the QGIS plugin never imports aXqua, so everything it does to a case file goes through here and comes back as one JSON document:

schema every setting of a case file: label, kind, unit, explanation case read the case file as it is written case write replace it with a JSON document read from standard input case new a new case file with the entries every case has check everything that is wrong with a case, as findings

case write writes what it is given and then checks it. A case is incomplete while it is being filled in, and an editor that refused to save an incomplete case would lose the work. The original file is kept as <name>.bak the first time it is replaced, because writing goes through the data and the comments of a hand-written file are not kept.

axqua.casecli.run_schema(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

axqua.casecli.run_check(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

axqua.casecli.run_case(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int

Exemple de commandes cas

axqua example: get an example case onto this computer.

list the example cases there are, with their size get put one into a folder, ready to be opened in the plugin or run in a terminal

An example is a folder that works on its own: the case file, a guide and the input data. See axqua.core.examples for where the examples are read from.

axqua.examplecli.run_example(argv)

Paramètres:

argv (list[str])

Type renvoyé:

int